Avaya Communication Manager Administrator's Manual page 1269

follow the same rules that exist for administering an ARS code on the Feature Access Code
(FAC) screen.
Valid entries
0 to 9
ARS Prefix 1 Required for 10-Digit NANP Calls?
Valid entries
y/n
Attd FAC
The Attd FAC field is controlled by the Multiple Locations field on the Optional Features
screen (use the system-parameters customer-options command).
A user cannot administer an Attendant FAC unless an Attendant Access Code has first been
administered on either the Dial Plan Analysis Table screen or the Feature Access Code
(FAC) screen.
Note:
Within a dial plan, FAC/DAC codes and extensions cannot both start with the
Note:
same first digits.Either the FAC/DAC entries or the block of extensions must be
changed to have a different first digit.
Valid entries
0 to 9
Loc Number
Displays the location number (1 to 250). Corresponding entries in each row define the
numbering plan and daylight savings rule for each location number.
Loc. Parms.
This field is an index to the corresponding Location Parameters n screens for a specific
location. If Multinational Locations is activated, and you enter information into any other field on
Usage
Any valid FAC format is acceptable, up to four digits. Characters * or # are
permitted, but only in the first position. Many locations are expected to
share the same access code.
Usage
Enter y when a 1 must be dialed before all 10-digit NANP calls.
Usage
.Values up to two digits are permitted. Characters * or # are not permitted.
Many locations are expected to share the same access code.
Locations
Issue 2.1 May 2006 1269