Avaya Communication Manager Administrator's Manual page 1645

Maintenance Tests
Appears when the Group Type field is aplt, isdn, sip, or tie.
Valid entries
y/n
Measured
Indicates if the system will transmit data for this trunk group to the Call Management System
(CMS). You cannot use internal and both unless either the BCMS (Basic) or the VuStats field
is y on the System-Parameters Customer-Options screen. If the ATM field is set to y on the
System-Parameters Customer-Option screen, this field accepts only internal or none. If this
field contains a value other than internal or none when ATM is y, none appears.
Valid entries
internal
external
both
none
MF Tariff Free
This field appears for Access, APLT, DID, DIOD, DMI-BOS, and Tandem trunk groups when the
Incoming Dial Type field is mf or the Group Type field is tie, the Trunk Signaling Type field is
blank, cont, or dis, and the Incoming Dial Type field is mf.
Valid entries
y/n
Usage
Enter y if hourly maintenance tests will be made on this trunk group. One
or more trunk members must be administered for this entry to be saved.
Usage
Enter internal if the data can be sent to the Basic Call Management
System (BCMS), the VuStats data display, or both.
Enter external to send the data to the CMS.
Enter both to collect data internally and to send it to the CMS.
Enter none if trunk group measurement reports are not required.
Usage
Enter y to make Communication Manager generate an MFC Tariff-Free
Backward Signal (administered on the
Multifrequency-Signaling-Related-System-Parameters screen) during
call setup instead of the "free" signal. This aids CO billing.
Trunk Group
Issue 2.1 May 2006 1645