Ip Network Region - Avaya Communication Manager Administrator's Manual

Screen Reference

IP Network Region

Use this screen to configure within-region and between-region connectivity settings for all VoIP
resources and endpoints within a given IP region. The first page is used to modify the audio and
QoS settings. The Codec Set field on this page reflects the CODEC set that must be used for
connections between telephones within this region or between telephones and MedPro/Prowler
boards and media gateways within this region. The ability to do NAT shuffling for direct IP-to-IP
audio connections is also supported.
Field descriptions for page 1
Figure 409: IP Network Region screen
change ip-network-region n
Region: n
Location:
Name:
MEDIA PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3028
DIFFSERV/TOS PARAMETERS
Call Control PHB Value:
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 6
Note:
The display ip-network-region command displays the values that you
Note:
assign on this screen.
1148 Administrator Guide for Avaya Communication Manager
Authoritative Domain:
Audio PHB Value:
Video PHB Value:
Audio 802.1p Priority: 6
Video 802.1p Priority: 7
Keep-Alive Count: 5
IP NETWORK REGION
Intra-region IP-IP Direct Audio: n
Inter-region IP-IP Direct Audio: n
IP Audio Hairpinning? n
RTCP Reporting Enabled? y
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
Server IP Address:
RTCP Report Period(secs): 5
AUDIO RESOURCE RESERVATION PARAMETERS
RSVP Refresh Rate(secs): 15
Retry upon RSVP Failure Enabled? y
RSVP unreserved (BBE) PHB Value: 40
Page 1 of x
. .
Server Port: 5005
RSVP Enabled? y
RSVP Profile:
.