Ip Ssh Pubkey-Auth - Dell PowerConnect M6348 Cli Reference Manual

icglk02LYciz+Z4TrEU/9FJxwPiVQOjc+KBXuR0juNg5nFYsY0ZCk0N/W9a/tnkm1s
hRE7Di71+w3fNiOA6w9o44t6+AINEICBCCA4YcF6zMzaT1wefWwX6f+Rmt5nhhqdAt
N/4oJfce166DqVX1gWmNzNR4DYDvSzg0lDnwCAC8Qh
console(config-pubkey-key)#exit
ip ssh port
Use the ip ssh port command in Global Configuration mode to specify the TCP port to be used
by the SSH server. To use the default port, use the no form of this command.
Syntax
ip ssh port port-number
no ip ssh port
port-number — Port number for use by the SSH server. (Range: 1–65535)
•
Default Configuration
The default value is 22.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the port to be used by the SSH server as 8080.
console(config)#ip ssh port 8080

ip ssh pubkey-auth

Use the ip ssh pubkey-auth command in Global Configuration mode to enable public key
authentication for incoming SSH sessions. To disable this function, use the no form of this
command.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
1064