reload
Use the reload command in Privileged EXEC mode to reload stack members.
Syntax
unit
reload [
]
unit
•
— Unit number to be reloaded.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If no unit is specified, all units are reloaded.
Example
The following example displays how to reload the stack.
console#reload 1
Management switch has unsaved changes.
Would you like to save them now? (y/n)n
Configuration Not Saved!
Are you sure you want to reload the switch? (y/n) y
Reloading management switch 1.
set description
Use the set description command in Stack Global Configuration mode to associate a text
description with a switch in the stack.
Syntax
unit description
set description
unit — The switch identifier. (Range: 1–12)
•
description — The text description. (Range: 1–80 alphanumeric characters)
•
1095