Mapa Messages - Nortel CC MIS User Manual

May 2007

MAPA messages

Introduction
This section contains the error messages generated by the MAPA subsystem
of the CC MIS product.
Note: The CC MIS product runs on a Down Stream Processor, therefore the
error messages do not appear in the switch log.
Informational messages
This section lists the informational messages that may be generated by the
master "ccmis" process. These messages are produced as part of normal
system operation to indicate the occurrence of significant events.
Clock has been synchronized to network time
MAPA has completed synchronizing the time on the local node with the
network time. (Action Code: J)
Node nnn (xxxxxx) is UP
The remote node whose ID and name are given by "nnn" and "xxxxxx"
respectively is now operational. (Action Code: J)
Starting network time synchronization...
MAPA is starting to synchronize the time on the local node with the network
time. This log only appears during system start-up. (Action Code: J)
System shutdown completed
MAPA has completed the orderly shutdown of the system and is exiting
without error. This occurs when the system is shut down. (Action Code: J)
System startup initiated
MAPA is starting the orderly startup of the system. (Action Code: J)
CC MIS Installation and Maintenance
System Log messages
467