Nortel CC MIS User Manual page 516

System Log messages
Duplicate video attribute
Video specification has already been defined in <term>.VA file.
(Action Code: B)
Logical video attribute definition is missing
One of the video attributes was not defined for the selected terminal type.
(Action Code: B)
No '=' found in special character entry
The entry in the <term>.SC file is improperly formatted. (Action Code: B)
Logical character code is invalid
The internal character code is not within the range of 1 to 254.
(Action Code: B)
Physical character code is invalid
The external character code is not within the range of 1 to 254.
(Action Code: B)
Unable to open special character file
Either the <term>.SC file couldn't be located or its access rights prohibited
read access. (Action Code: B)
Table form has not yet been created
Attempt to animate a table form that has not been created. (Action Code: B)
Invalid character following '^'
In <term>.VA file, character being control-shifted is not in the set of
@, A-Z, a-z, [, \, ], ^, or _. (Action Code: B)
Invalid token
Token being converted is not an octal number. (Action Code: B)
Value of token exceeds 377 octal
The token's value as specified in the <term>.VA file exceeds 377 octal.
(Action Code: B)
516 Call Center Management Information System
Standard 2.0