Nortel CC MIS User Manual page 155

May 2007
Procedure 15:
1 Access the Maintenance and Administration main menu.
2 Type c to access the Configuration main menu.
The system displays the Configuration main menu (see Figure 25 on
page 134).
3 Select Get Access Updates Rights to switch to Updates Allowed mode.
4 Select SNMP Configuration.
The SNMP Configuration screen appears (see Figure 40 on page 155).
Figure 40:
The Transfer SNMP MIB Definitions command on the System Upgrade
Utility menu transfers CC MIS system MIB and CC MIS Partition MIB
definition files to selected Network Management Systems (NMS).
The SNMP Configuration screen displays information concerning the three
CC MIS SNMP communities: Read-only, Read-write, and Trap. These
communities consists of:
community name
access mode
set of IP addresses (of SNMP managers)
CC MIS Installation and Maintenance
Accessing the SNMP Configuration screen
SNMP Configuration
Configuring the CC MIS application
155