Nortel CC MIS User Manual page 412

TCP/IP switch links using ARN
13 Configure the parameters in this window according to Table 53.
Table 53:
Parameter name
Note: You must change parameter values shown in bold from the default
values.
Local TCP Port
Destination Connection
Type
Source X.121 Address
Destination X.121
Address
X.25 Call User Data
14 Click OK.
The IPEX Mapping Table Configuration window (see Figure 147 on
page 413) reappears.
412
IPEX Mapping parameters
Value
<TCP port number that CC MIS will
connect to> (must be in the range 12304 –
16399)
SVC
<the DNA from the switch>
<the same DNA from the switch>
00000000 (eight zeros)
Call Center Management Information System
Standard 2.0