Event Messages; Dealing With Event Messages - Nortel ICS Install Manual

Event messages

Event messages appear as items in the System administration
log or the System test log of the Maintenance session. Most of
these event messages can only be caused by an unusual
combination of events, and should rarely occur.
Each event is assigned a severity number. An S preceding this
number, S4 for example, may appear in the event message.
S9 is the most severe. If the log is full, new event messages
with a higher severity number replace existing event messages
of a lower severity. For this reason, you should check event
messages at regular intervals. You can then deal with all
messages before they are replaced.

Dealing with event messages

For every event message that you see:
1. Record the event on the appropriate Maintenance record.
2. Refer to Significant event messages.
3. To see if the event caused the Norstar system to
automatically restart, consult the table on Event Message
on page 561.
N0130943 02
Event messages / 555
Modular ICS 7.1 Installer Guide