Nortel CC MIS User Manual page 401

May 2007
Starting the Configuration Manager
When you connect to the router from the main Site Manager window, Site
Manager displays administrative information in the main Site Manager
window (see Figure 135). At this point you can use the Configuration
Manager to change the configuration information for the router.
To begin making changes to the router configuration, use the steps in
Procedure 78.
Procedure 78:
1 In the Well-Known Connections list, select the IP address of the router.
2 In the main Site Manager window, choose Tools > Configuration
Manager > Dynamic.
The Configuration Manager window appears (see Figure 137). Use this
window to change the configuration of the router.
Figure 137:
CC MIS Installation and Maintenance
Changing the router configuration
Configuration Manager window
TCP/IP switch links using ARN
401