Nortel CC MIS User Manual page 167

May 2007
synchronized with the switch. If the system experiences drifting time, you
must shut down and restart it and reset the date and time.
6 Enter y to indicate that the date and time are correctly set.
The system displays the following messages:
Starting CC MIS. . . .
CC MIS has been started.
Press RETURN to continue.
7 Press <enter>.
The system displays the Run State Utilities menu. Because the CC MIS
application is started, the Run State Utilities menu changes to include
the Shutdown the CC MIS Application command (instead of the Startup
the CC MIS Application command).
CC MIS Installation and Maintenance
Shutdown, startup, reboot, and power down
167