Nortel CC MIS User Manual page 487

May 2007
Invalid argument error - type: nn
The switch is reporting an invalid argument error of a type that is not
recognized by the DSP. 'nn' gives the unrecognized reason code contained in
the error message. No action is taken by DMSLINK other than reporting the
error. (Action Code: L)
Invalid arguments passed - ignored
The DMSLINK process has been invoked with invalid arguments. The
invalid arguments have been ignored. (Action Code: B)
Invalid NOP protocol version
The switch has rejected a log on request because the NOP protocol version
requested by the DSP is invalid. (Action Code: I)
Invalid line in initialization file
At least one invalid line was found in the initialization file. (Action Code: B)
Invalid subpool password - LM request denied
A load management request has been denied because the subpool password
as read from the configuration database does not match the password
datafilled on the switch for the specified subpool. This error condition is
passed back to the CCLINK process in the response to its request.
(Action Code: M)
LINK TRACE FILE SIZE LIMIT REACHED
The link trace data file for this link has reached its maximum file size. Link
data tracing has been terminated. (Action Code: J)
Lost connection to switch
DMSLINK has lost communication with the switch. (Action Code: L, F)
Lost synchronization on input data stream
DMSLINK has lost synchronization on the input data stream and will
attempt to resynchronize. (Action Code: L)
CC MIS Installation and Maintenance
System Log messages
487