Nortel CC MIS User Manual page 507

May 2007
invalid partition mode (partition=xxxx; mode=xxxx)
The partition has an invalid mode. (Action Code: B)
no disk selected for partition xxxx
There is no disk selected for the specified partition. (Action Code: B)
no link selected for partition xxxx
There is no link selected for the specified partition. (Action Code: B)
partition number xxx out of range
The partition number is out of range. (Action Code: B)
Could not flush message buffer
An error occurred trying to flush the message buffer. (Action Code: B)
Could not make socket non-blocking
An error occurred trying to make the socket non-blocking. (Action Code: B)
Unrecognized message xxxx received from xxxx
An unrecognized message is received. (Action Code: B)
cfgmgr closing socket to cfgutil (cfgutil PID = xxxx)
An error occurred closing the socket to the cfgutil process. (Action Code: B)
completion acknowledgment fails (type = xxxx, sequence =
xxxx)
An error occurred trying to send a completion acknowledgment.
(Action Code: B)
lost connection with client
The connection was lost with the client. (Action Code: B)
message acknowledgment fails (type = xxxx, sequence = xxxx)
An error occurred trying to send a message acknowledgment.
(Action Code: B)
CC MIS Installation and Maintenance
System Log messages
507