Nortel CC MIS User Manual page 528

System Log messages
Error getting runstate for partition xx
An error occurred determining the state of the specified partition.
(Action Code: B)
Unable to get operation result from CfgMgr
Unsuccessful in receiving a response from the Configuration Manager.
(Action Code: B)
Error getting partition runstate
An error occurred trying to determine the state of a partition.
(Action Code: B)
Error starting partition(s)
An error occurred trying to start the partition. (Action Code: B)
Error stopping partition(s)
An error occurred trying to stop the partition. (Action Code: B)
Operation successful
Operation requested was performed successfully. (Action Code: J)
Operation failed
Operation requested failed. (Action Code: B)
Changes disabled on a partition basis
Changes are disabled for a particular partition. (Action Code: J)
Partitions in SETUP mode may not be started
Trying to start a partition in SETUP mode failed. (Action Code: AI)
A SIMULATOR type link is required for this operation
Operation requires a simulator link. (Action Code: AI)
A LIVE type link is required for this operation
Operation requires a live link. (Action Code: AI)
528 Call Center Management Information System
Standard 2.0