Nortel CC MIS User Manual page 227

May 2007
For local partitions, select the Interval Configuration function key on the
Storage Calculator screen (Configuration > Partition Configuration >
Configuration Options > Storage Calculator > Interval Configuration) to
display the Interval Configuration screen. For NAPs, select the Interval
Configuration option from the Configuration Options menu.
Figure 62 shows the Interval Configuration screen.
Figure 62:
The amount of disk space available and the amount required to store data for
the selected intervals appears on the Interval Configuration screen under the
Disk Space column (see Figure 62). You can edit the Size Limit field in this
screen.
The Storage Calculator initially sets the amount of space required based on
the default setting (30 minutes) for intervals. Valid values are 5, 10, 15, 30,
and 60 minutes. Leave the field blank if you want to use the default setting.
Note: If you intend to use more frequent intervals (5, 10, or 15 minutes),
additional disk space is required.
CC MIS Installation and Maintenance
Interval Configuration screen
Local partitions
227