May 2007
View system monitor
The System Monitor screen consists of up to seven status screens
(depending on the type of partition):
Program (see page 288)
Lock (see page 292)
Partition (see page 294)
Physical node (see page 301)
Virtual node (see page 302)
IP Port (see page 297)
CPU Utilization (see page 299)
You can select the View System Monitor command from the Diagnostics
screen.
Use the Commands menu to access the various status screens on the System
Monitor screen. Pressing a function key displays the Commands menu.
When you select a status screen, the System Monitor screen is redrawn with
the selected status.
You can select how often the System Monitor updates its real-time
information from the Commands menu. Valid refresh rates are 1 to 60
seconds in 1-second increments. The default is 5 seconds.
CC MIS Installation and Maintenance
Monitoring system functions
287