Nortel CC MIS User Manual page 503

May 2007
Could not restart partition xxxx after the move
An error occurred trying to restart the specified partition after it was moved.
(Action Code: B)
Could not transition partition xxxx to correct mode
An error occurred trying to transition the specified partition to the correct
mode. (Action Code: B)
Failed to remove data database for partition xxxx
An error occurred trying to remove the data database for the specified
partition. (Action Code: B)
Failed to send move acknowledgment to PID xxxx
An error occurred trying to send the move acknowledgment to the specified
process ID. (Action Code: B)
Failed to set up system database for partition xxxx
An error occurred trying to set up the system database for the specified
partition. (Action Code: B)
Insufficient space on disk to change partition size to xxxx megs
An error occurred trying to set up the system database for the specified
partition. (Action Code: B)
Insufficient space to add partition xxxx to diskNum xxxx
There is insufficient space to add the specified partition to the specified disk.
(Action Code: B)
Invalid message type (xxxx)
An invalid message was received. (Action Code: B)
LANCONNECTS table access failure (rc = xxxx)
Unable to access record in the LANCONNECTS table. (Action Code: B)
LINK_DEF Table access failure (rc = xxxx)
Unable to access record in the LINK_DEF table. (Action Code: B)
CC MIS Installation and Maintenance
System Log messages
503