Nortel CC MIS User Manual page 414

TCP/IP switch links using ARN
Table 54:
Parameter name
Note: You must change parameter values shown in bold from the default
values.
X.25 Call User Data
Idle Session Timer
Keep Alive Retransmit Timer
Keep Alive Retransmit Count
Header Type
Translate Calling X.121 Address <leave blank>
16 Click Done.
You are returned to Configuration Manager window, where the COM port
just configured should now be white (used) instead of blue.
17 Click the COM port again.
The Edit Connector window appears (see Figure 148).
Figure 148:
414
IPEX Mapping Table Configuration parameters
Edit Connector window
Value
00000000
(set in previous step)
120
3
5
NONE
Call Center Management Information System
Standard 2.0