Nortel CC MIS User Manual page 183

May 2007
Backup screen
The Backup screen is available through the Backup and Restore Utilities >
Backup menu option.
Figure 46 shows a sample Backup screen with a sample ad hoc backup set.
The upper portion of the screen shows the Backup Specification and the
lower portion of the screen shows the Backup Status.
Figure 46:
Backup Specification
The default Backup value is Yes for the configuration database.
The default Backup value for each partition is Yes if the nightly backup
for the partition is enabled (see "Local partitions" on page 197).
The default Backup value for NAPs is Yes for the definitions database
only.
Backup Status
The lower portion of the screen displays information messages about the
current backup.
CC MIS Installation and Maintenance
Backup screen
Backing up, restoring, and importing data
183