Nortel CC MIS User Manual page 493

May 2007
Data transmit local failure on <LAN>
An error occurred while attempting to write data to the switch link. (Action
Code: F, B)
Invalid parameter [c] in initialization file
An invalid parameter was found in the initialization file. The invalid
parameter is identified by "[c]" in the error message. (Action Code: B)
Invalid pool password
The password for the pool as read from the system database does not match
the password datafilled on the switch for the pool. (Action Code: M)
Invalid pool protocol
The switch is not running the correct protocol version. (Action Code: M)
Maximum logons exceeded
The switch has disallowed the DSP's request to log on because it already has
the maximum number of simultaneous logons in progress.
(Action Code: K, S)
Missing parameter in initialization file
At least one parameter is missing from the initialization file specified by the
"-f" option used to invoke the DMSLINK process. (Action Code: B)
Unable to open startup file: xxxxxx
DMSLINK was unable to open the startup configuration file specified by the
"-f" option used to invoke the DMSLINK process. (Action Code: B)
Unable to start ACDMIS application on switch
The switch is returning an invalid argument error stating that it does not
recognize the application ID. (Action Code: Q)
Unable to start simulator process
DMSLINK was unable to start the simulator process for a simulated link.
(Action Code: B)
CC MIS Installation and Maintenance
System Log messages
493