Nortel CC MIS User Manual page 413

May 2007
Figure 147:
added)
15 Configure the parameters in this window according to Table 54.
Table 54:
Parameter name
Note: You must change parameter values shown in bold from the default
values.
Enable
Source X.121 Address
Destination X.121 Address
Client Queue Size
CC MIS Installation and Maintenance
IPEX Mapping Table Configuration window (after IPEX mapping
IPEX Mapping Table Configuration parameters
TCP/IP switch links using ARN
Value
Enable
<DNA from switch>
(set in previous step)
<DNA from switch>
(set in previous step)
8192
413