Nortel CC MIS User Manual page 78

Installing CC MIS
Continue by checking the data file system mount-point by entering the
following command:
ls -l data
The system responds with the following information:
total 4
drwxrwxrwx
6 Ensure that the data mount-point directory displays the proper
permissions (drwxrwxrwx) in the first column of the display (shown in
Step 4).
If the proper permissions are not displayed, enter the following command
to correct the permissions:
chmod 0777 data/fs1
7 Enter the following command to change directory to the root of the file
system that will contain the CC MIS application:
cd system
8 Enter the following commands to mount the CD-ROM file system
(/mnt/cdrom) and list the contents of the lnx directory on the CD-ROM:
# mount /mnt/cdrom
# ls -l /mnt/cdrom/lnx
Note: If the CD-ROM is already mounted, you may receive an error
message indicating that the mount command failed because the device
is already mounted.
The system responds with information similar to the following:
total 15988
-r-xr-xr-x 1 root root 16343040 Feb 28 09:18 ccmis-
6.0.0-31.i386.tar
-r-xr-xr-x 1 root root 28520 Feb 28 09:18 preinstall
Note: The name of the ccmis .tar file depends on the actual release and
build number of the CC MIS application.
78
3 root root 4096 Mar 30 18:42 fs1
Call Center Management Information System
Standard 2.0