Nortel CC MIS User Manual page 169

May 2007
4 Type y to power down the system.
Note: To quit and return to the Run State Utilities menu, type q.
The ccmis user is logged off as the operating system takes over the
process of shutting down the system.
If you are remotely logged on when the power down command was
issued, the following messages appear.
If you are logged on to the system console, the operating system
displays several additional messages on the console as it stops all
running services and processes.
The system displays the following messages:
CC MIS terminating ...
Beginning operating system shutdown.
SHUTDOWN started
Tues
THE SYSTEM IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged.
Power down.
.
5 Turn off the system power using the power button on the front of the
server after the message "Power down." appears.
6 If you powered down the system to perform a hardware maintenance
operation, Nortel recommends that you unplug the power cord from the
wall outlet or UPS.
CC MIS Installation and Maintenance
Feb6 14:11:40 CDT 2005
CAUTION
Risk of corrupted files
After you complete Step 4, you must wait for the message
"Power down" before you proceed to Step 5.
Failure to wait can result in corrupted files on the disk.
Shutdown, startup, reboot, and power down
169