Nortel CC MIS User Manual page 17

May 2007
Table 1 lists the typographic conventions that are used throughout this
guide.
Table 1:
Typographic conventions
Key sequence
<Return>
[Commands]
Note: The function keys associated with a command are listed on the lower
portion of the appropriate screen. Procedures in this NTP provide the name
of the function key. The screens show examples of function keys with their
associated commands. The function key number depends on the type of
terminal and emulation mode being used. See each program screen for the
actual function key to press to select the applicable command.
Table 2 lists typographic conventions that are used in the procedures in this
guide.
Table 2:
Conventions used in procedures
Key sequence
Type xyz
Notice
CC MIS Installation and Maintenance
Function
Words in angled brackets represent a
specific key on your keyboard that you
press.
Words in square brackets represent one of
the keys available to you from the function
key menu.
Function
Bold letters represent the keys that you press in
the action part of the procedure.
<enter> means that you press the Enter key after
you press the function key.
Words in this font represent a system response to
the actions in the procedure.
About this document
17