Partition Startup And Shutdown - Nortel CC MIS User Manual

Local partitions

Partition startup and shutdown

You can use the following two screens to change the status of a partition:
Partition Startup and Shutdown (see Figure 75 on page 248)
Partition Configuration (see Figure 76 on page 249)
You can change the state of a partition by specifying either Running or
Stopped.
Perform the steps in Procedure 41 to change the state of a partition.
Procedure 41:
1 Access the Maintenance and Administration main menu.
2 Type r to access the Run State Utilities menu.
The system displays the Run State Utilities menu (see Figure 75).
Figure 75:
3 Type p to access the Partition Startup and Shutdown screen.
The system displays the Partition Startup and Shutdown screen (see
Figure 76).
248
Changing the state of a partition
Run State Utilities menu
Call Center Management Information System
Standard 2.0