Nortel CC MIS User Manual page 318

Monitoring system functions
Selecting a different Link
Use the Select Different Link command to select a different link for the trace
commands.
Perform the steps in Procedure 60 to use the Select Different Link
command.
Procedure 60:
1 Access the Maintenance and Administration main menu.
2 Type d to access the Diagnostics screen.
The system displays the Diagnostics screen.
3 Type t to access the Link Trace screen.
The system displays the Link Trace screen.
4 Press l to access the Select Different Link option.
The system displays the Trace Link screen (see Figure 112).
Figure 112:
5 Enter the new link number.
The Link Trace screen appears.
318
Selecting a different link for Link Trace
Trace Link screen
Call Center Management Information System
Standard 2.0