Nortel CC MIS User Manual page 159

May 2007
7 Select one of the following destinations for the report.
System Default Printer—This option sends the report directly from the
CC MIS server to the system default printer. Go to Step 9.
Partition—If you select this option, you can select a partition defined
on the system and then select any one of the report destinations
defined within that partition. If you send the report to a partition
device, two additional fields appear on the screen (Partition and Send
To), in which you can select the partition and the device within that
partition. Go to Step 8.
Figure 42:
CC MIS Installation and Maintenance
Destination options
Configuring the CC MIS application
159