Nortel CC MIS User Manual page 560

System Log messages
Too many languages selected
The database server found that there were more than three languages
enabled on the system. The excess languages have been automatically
disabled. (Action Code: B)
Unable to lock definitions database: xxxxx
The database server was unable to get an exclusive lock on the definitions
database for the reason indicated in the "xxxxx" field. (Action Code: B)
Unrecognized database command received - type: xx
The database server received an invalid message type from a client program.
The invalid message type is given in the "xx" field. (Action Code: B)
Fatal error messages
Fatal error messages are generated by the Definitions Database Server
process in response to conditions that prevent the process from continuing
normal execution. This section lists these error messages.
No Standard/Custom designation specified for table xx
The database schema does not indicate either a standard or a custom
component in the database for the table specified by "xx". (Action Code: B)
Unable to determine current language selections
The database server failed to determine which languages are enabled in the
system. (Action Code: A)
Unable to determine supported languages
The database server failed to determine what languages are supported on the
system. (Action Code: A)
560 Call Center Management Information System
Standard 2.0