Nortel CC MIS User Manual page 338

Switch link datafill requirements
Table 41:
Switch
Table
338
Data link datafill (Part 3 of 8)
Field
PRTCLDAT
LINKNABL
CONVNABL
L2WINDOW
L3DATA
NODETYPE
CLKSRCE
SVCS2WAY
Value Description
X2584 Specifies the 1984 version
of the X.25 standard.
0 Specifies 0 as the number
of minutes a link can
remain in the enabling
state before it is busied out
and reset.
0 Specifies 0 as the number
of minutes data
transmission on the link
can remain enabled
without restarting the link.
7 Specifies the frame
window size as 7.
P256 Specifies the packet size as
256 bytes.
DTE Specifies the datalink to
act as a DTE.
EXTERNAL Specifies that external
clocking is used.
2 Specifies that there are two
2-way switched virtual
circuits.
Call Center Management Information System
Standard 2.0