Nortel CC MIS User Manual page 80

Installing CC MIS
12 Enter the following command to change directory to the install directory.
cd install
The install directory was extracted from the .tar file. The install directory
contains the installation scripts used to install the CC MIS application.
When in the install directory, the actual installation of the application is
initiated with the ./install command.
13 Enter the following command to start the installation.
./install
The preinstallation script runs to verify that the system is properly
configured for the CC MIS application. For more information, see
"Preinstallation script file" on page 51.
After the preinstallation script runs, the CC MIS Release 6.0 installation
script begins.
80 Call Center Management Information System
Standard 2.0