Nortel CC MIS User Manual page 232

Local partitions
Figure 64:
8 Select a terminal and press <enter>.
The new selection is added to the Serial Terminals screen.
Note: The baud rate and modem control settings are configured on the
terminal server; therefore, these options no longer appear in CC MIS
Release 6.0.
9 To add comments that describe the location of the terminal, do the
following:
a. Select the Comments field.
b. Type a comment.
Note: The Comments field is optional.
10 Select the Commands function key, and then select Save and Exit from
the menu to save the configuration.
232
Adding a serial terminal
Call Center Management Information System
Standard 2.0