Nortel CC MIS User Manual page 506

System Log messages
DBSTORAGE table access failure (rc = xxxx)
Unable to access record in the DBSTORAGE table. (Action Code: B)
DBSTORAGE table not initialized for partition xxxx
The DBSTORAGE table is not initialized for the specified partition.
(Action Code: B)
LINK_DEF table access failure (linkNum=xxxx; rc=xxxx)
Unable to access record in the LINK_DEF table. (Action Code: B)
Link number xxxx not found
The specified link number was not found. (Action Code: B)
Live type link required to start partition xxxx in product mode
You must have a live link to start a partition in product mode.
(Action Code: AI)
No more partitions using a live link may be started (max = xxxx)
The maximum number of live partitions has already been reached.
(Action Code: AI)
No subpool name defined for partition xxxx
There is no subpool name defined for the specified partition.
(Action Code: AI)
No subpool password defined for partition xxxx
There is no subpool password defined for the specified partition.
(Action Code: AI)
STOREPARMS table access failure (custID = xxxx, rc = xxxx)
Unable to access record in the STOREPARMS table. (Action Code: B)
Simulator type link required to start partition xxxx in training
mode
You must have a simulator link to start a partition in training mode.
(Action Code: AI)
506 Call Center Management Information System
Standard 2.0