Nortel CC MIS User Manual page 263

May 2007
Adding and deleting nodes
Procedure 43:
1 To add a node to the physical network, select the Add Node command
(function key).
The Add Node menu appears (see Figure 83).
Figure 83:
2 Enter the Node Name and Node Address.
3 Select the Commands function key.
4 Select the Submit option to add the node or select Cancel to cancel the
add action.
Figure 84 on page 264 shows the Add Node Commands menu.
CC MIS Installation and Maintenance
Adding a node to the physical network
Add Node menu
Networked CC MIS
263