Macfilter Addsrc; Macfilter Addsrc All - NETGEAR ProSafe GSM7224P User Manual

Note: Configuring a destination port list is only valid for multicast MAC
addresses.
Format
macfilter adddest all <macaddr> <vlanid>
Mode
Global Config
no macfilter adddest all
This command removes all ports from the destination filter set for the MAC filter with the
given <macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as
a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter
must identify a valid VLAN.
Format
no macfilter adddest all <macaddr> <vlanid>
Mode
Global Config

macfilter addsrc

This command adds the interface to the source filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified
as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid>
parameter must identify a valid VLAN.
Format
macfilter addsrc <macaddr> <vlanid>
Mode
Interface Config
no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlanid>.
specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
<vlanid> parameter must identify a valid VLAN.
Format
no macfilter addsrc <macaddr> <vlanid>
Mode
Interface Config

macfilter addsrc all

This command adds all interfaces to the source filter set for the MAC filter with the MAC
address of <macaddr> and <vlanid>. You must specify the <macaddr> parameter as a
ProSafe Managed Switch
The <macaddr> parameter must be
Switching Commands
138