Config Macfilter Addsrc; Config Macfilter Delsrc; Config Macfilter Adddest - NETGEAR GSM7324 Reference Manual

7000 Series L3 Managed Switch Reference Manual for Software v1.0

config macfilter addsrc

This command adds the <slot.port> to the source filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-
byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlan> parameter must identify a valid VLAN.
The <slot.port> parameter identifies the source port to be added to the source port filter set for the
MAC filter.
If all is selected, all ports will be added to the source port filter set.
Format

config macfilter delsrc

This command removes a port from the source filter set for the MAC filter with the MAC address
of <macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlan> parameter must identify a valid VLAN.
The <slot.port> parameter identifies the source port to be removed from the source port filter set
for the MAC filter.
If all is selected, all ports will be removed from the source port filter set.
Format

config macfilter adddest

This command adds the <slot.port> to the destination filter set for the MAC filter with the given
<macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlan> parameter must identify a valid VLAN.
The <slot.port> parameter identifies the destination port to be added to the destination port filter
set for the MAC filter.
7-48
config macfilter addsrc <macaddr> <vlan>
<slot.port|all>
config macfilter delsrc <macaddr> <vlan>
<slot.port|all>
May 30, 2003 Beta Draft
Switching Commands