clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
Format
clear dot1x statistics {<unit/slot/port> | all}
Mode
Privileged EXEC
clear radius statistics
This command is used to clear all RADIUS statistics.
Format
clear radius statistics
Mode
Privileged EXEC
dot1x guest-vlan
This command configures VLAN as guest vlan on a per port basis. The command specifies
an active VLAN as an IEEE 802.1x guest VLAN. The range is 1 to the maximum VLAN ID
supported by the platform.
Default
disabled
Format
dot1x guest-vlan <vlan-id>
Mode
Interface Config
no dot1x guest-vlan
This command disables Guest VLAN on the interface.
Default
disabled
Format
no dot1x guest-vlan
Mode
Interface Config
dot1x initialize
This command begins the initialization sequence on the specified port. This command is only
valid if the control mode for the specified port is "auto" or "mac-based". If the control mode is
not 'auto' or "mac-based", an error will be returned.
Format
dot1x initialize <unit/slot/port>
Mode
Privileged EXEC
dot1x mac-auth-bypass
This command enables MAC-Based Authentication Bypass (MAB) for 802.1x-unaware
clients. MAB provides 802.1x-unaware clients controlled access to the network using the
ProSafe Managed Switch
Switching Commands
92