Manually Add Members To Or Remove Them From A Protocol-Based Vlan Group - NETGEAR MS510TX User Manual

The following table describes the nonconfigurable information displayed on the page.
Table 25. Protocol Based VLAN Mapping
Field
Group ID
VLAN ID
Ports
Delete a Protocol-Based VLAN Group

To delete a protocol-based VLAN group:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> VLAN > Advanced > Protocol Based VLAN Group Configuration.
The Protocol Based VLAN Group Configuration page displays.
6. Select the check box for the group that you want to remove.
7. Click the Delete button.
The protocol-based VLAN group is removed.
Manually Add Members to or Remove Them From a
Protocol-Based VLAN Group

To add members to or remove them from a protocol-based VLAN group:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
Smart Managed Pro Switches MS510TX and MS510TXPP
Definition
The ID of the group.
The VLAN ID that is associated with the group.
The ports that are assigned to the VLAN as a result of protocol-based
VLAN mapping.
Configure Switching
Access the Switch
106
on page 12.