Connectors; Glanded Installation Kit - Siemens SINAMICS G115D Operating Instructions Manual

Overview of the SINAMICS G115D drive
2.4 Optional components
Further information
For more information about mounting, connecting, and configuring the external braking
resistor, refer to the following chapters:
•
•
•
2.4.2

Connectors

QUICKON connector
The QUICKON connector is used for line supply connection to the connector variant
(QUICKON) of the G115D converter.
Article number
6SL3566-4MA00-0GA0
QUICKON nut
The QUICKON nut is used for line supply connection to the connector variant (QUICKON) of
the G115D converter.
Article number
6SL3566-4NA00-0GA0
2.4.3

Glanded installation kit

Glanded installation kit for G115D Motor Mounted
Article number
6SL3566-2GM00-0GA0
32
Mounting the external braking resistor (Page 40)
Connecting the external braking resistor (Page 94)
Dynamic braking (Page 280)
Illustration
Illustration
Illustration
Interface
Line supply (IN) - X1
Interface
Line supply (IN) - X1
Interface Cable gland Quantity
Line supply - X1/X3 M25 × 1.5
24 V power supply - M20 × 1.5
X01/X02
Digital inputs/outputs - M16 × 1.5
X07/X08/X05
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
Quantity Tightening torque
1 7 Nm (62.0 lbf.in)
Quantity Tightening torque
1 7 Nm (62.0 lbf.in)
Tightening torque
2 12 Nm
(106.2 lbf.in)
2 12 Nm
(106.2 lbf.in)
3 10 Nm (88.5 lbf.in)
SINAMICS G115D distributed drive