Mounting; Mounting The G115D Motor Mounted Drive - Siemens SINAMICS G115D Operating Instructions Manual

Mounting

Risk of burns and fire due to high temperatures
During operation and for a short time after switching the converter off, the surfaces reach
temperatures that can inflict burns or start fires.
• Before attempting to touch the surfaces of the converter, ensure that enough time is
• Remove any flammable materials from around the converter to reduce the risk of fire.
NOTICE
Converter damage due to misusage as a step or ledge
The converter is not designed to support a substantial weight. Substantial weight placed on
the system could cause severe damage to the converter.
• Don't use the converter as a step or ledge.
3.1

Mounting the G115D Motor Mounted drive

General instructions for installation
Observe the mounting instructions and maximum permissible vibration severity stated in the
following chapter:
Note that the drive is delivered with the converter mounted on the geared motor.
SINAMICS G115D distributed drive
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
WARNING
given to allow the converter to cool down to a safe temperature to avoid personal injury.
Installation notes (Page 393)
3
35