Siemens SINAMICS G115D Operating Instructions Manual page 160

Advanced commissioning
6.6 Drive control via Ethernet/IP
Instance Attribute
No.
1
2
3
4
5
6
10
11
Link Object, Instance Number: F6 hex
Supported services
Class
Class Attribute
No.
1
2
3
158
Service Type Name
get UNIT32 Status
get UNIT32 Configuration
Capability
get, set UNIT32 Configura-
tion Control
get UNIT16 Path Size (in
WORDs)
UNIT8 Path
get, set STRING Interface
Configuration
UNIT32
get, set UNIT16 Host Name
STRING
get, set UNIT8 Select ACD
get, set UNIT8 Last Conflict
Detected
UNIT8
UNIT8
• Get Attribute all
• Get Attribute single
Service Type
get UINT16
get UINT16
get UINT16
Value/explanation
Fixed value: 1 hex
1: Configuration acknowledged, by DHCP or saved values
Fixed value: 94 hex
4 hex: DHCP supported,
10 hex: Configuration can be adjusted,
80 hex: ACD-capable
1 hex: Saved values
3 hex: DHCP
Fixed value: 2 hex
20 hex,
F6 hex,
24 hex,
05 hex, where 5 hex is the number of instances of F6 hex
(four physical ports plus one internal port).
r61000 Name of Station
r61001 IP address
Host Name Length
local OM flash:
0: Disabled,
1: Enabled
local OM flash ACD Activity
local OM flash Remote MAC
local OM flash ARP PDU
Instance
Name
Revision
Max Instance
Num of Instances
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
• Get Attribute all
• Get Attribute single
• Set Attribute single
SINAMICS G115D distributed drive