Siemens SINAMICS G115D Operating Instructions Manual page 31

Rating plate
The figure below shows an example of the rating plate attached to the side of the converter:
①
②
Compatible motors
Siemens motors that can be operated
You can connect SIMOGEAR 2KJ3 or 2KJ8 geared motors or other Siemens standard
asynchronous or reluctance motors to the SINAMICS G115D wall-mounted converters.
For further information on the possible SIMOGEAR geared motors in combination with the
SINAMICS G115D converter, refer to the following:
• The relevant chapter in this manual
• The relevant motor catalog
• Drive Technology Configurator (DT Configurator)
You can find information on further motors on the Internet:
(https://support.industry.siemens.com/cs/ww/en/view/100426622)
Third-party motors that can be operated
You can also operate standard asynchronous (geared) motors from other manufacturers with
the SINAMICS G115D wall-mounted converter.
Multi-motor operation
Multi-motor operation involves simultaneously operating several motors from one converter.
For standard asynchronous motors, multi-motor operation is generally permissible. Additional
preconditions and restrictions relating to multi-motor operation are available on the Internet:
SINAMICS G115D distributed drive
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
Article number
Product serial number
Additional information on the SIMOGEAR geared motor (Page 385)
Catalog D 31.2 (https://support.industry.siemens.com/cs/ww/en/view/109750324)
Catalog D 50.1 (https://support.industry.siemens.com/cs/ww/en/view/109746934)
DT Configurator (http://www.siemens.com/dt-configurator)
Motors that can be operated
Multi-motor operation (https://support.industry.siemens.com/cs/ww/en/view/84049346)
Overview of the SINAMICS G115D drive
③ Motor data
④ Degree of protection
2.2 Scope of delivery
29