Siemens SINAMICS G115D Operating Instructions Manual page 449

Distributed drive for conveyor technology control

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Figure 11-16 Example of a fitting device

Observe the correct mounting arrangement to minimize stress on shafts and bearings due to

lateral forces.

Figure 11-17 Mounting arrangement for low stress on shafts and bearings

1. Use either benzine or solvent to remove the anti-corrosion protection from the shaft ends

and flanges or remove the applied protective skin.

2. Fit the drive input and output elements to the shafts. Fasten the elements when necessary.

You have now fitted the input or output element.

SINAMICS G115D distributed drive

Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002

Additional information on the SIMOGEAR geared motor

11.3 Specific data gearbox