Oil Quantities; Helical Gearbox - Siemens SINAMICS G115D Operating Instructions Manual

Additional information on the SIMOGEAR geared motor
11.3 Specific data gearbox
11.3.32

Oil quantities

NOTICE
Damage to the gearbox caused by incorrect oil quantities
The oil quantities listed in the tables are guidance values for changing the oil. They are used,
for example, for lubricant storage and procurement.
The precise values depend on the number of stages and transmission ratio of the gearbox.
The specified oil quantities are valid for the standard mounting position.
Note
Gearbox in special mounting position
The gearbox is intended for a specific rotation angle and is delivered with the correct quantity
of oil for this purpose.
You will find information regarding oil quantity and type of oil on the rating plate.
11.3.32.1

Helical gearbox

Table 11- 51 Oil quantities in l for E, EZ, EF , sizes 39 - 89
Type
E.39
E.49
E.69
E.89
Table 11- 52 Oil quantities in l for D/Z, DB/ZB, DF/ZF, DZ/ZZ, sizes 19 - 89
Type
D.19
D.29
D.39
D.49
D.59
D.69
D.79
D.89
Z.19
Z.29
Z.39
516
Mounting position
M1 M2
0.2 0.5
0.4 1
0.6 1.9
0.9 3.7
Mounting position
M1 M2
0.15 0.45
0.15 0.65
0.25 0.9
0.55 1.8
0.45 1.9
0.6 2
1 3.5
2 6.5
0.15 0.5
0.2 0.7
0.3 0.95
M3 M4
0.4 0.7
0.95 1.5
1.6 2.5
2.5 4
M3 M4
0.45 0.45
0.45 0.5
0.8 0.85
1.8 1.7
1.9 1.8
2.4 2.3
3.7 3.6
6.2 6
0.45 0.5
0.45 0.6
0.85 0.95
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
M5 M6
0.45 0.45
1 0.95
1.7 1.7
3 2.9
M5 M6
0.4 0.3
0.55 0.4
0.8 0.7
1.7 1.2
1.8 1.2
2.2 1.5
3.4 2.3
6 4.2
0.4 0.35
0.55 0.3
0.9 0.25
SINAMICS G115D distributed drive