Bico Technology: Interconnecting Signals; Binectors, Connectors - Siemens SINAMICS S120 Function Manual

Basic information about the drive system

12.4 BICO technology: interconnecting signals

12.4 BICO technology: interconnecting signals
Every drive contains a large number of interconnectable input and output variables and
internal control variables.
BICO technology (Binector Connector Technology) allows the drive to be adapted to a wide
variety of requirements.
Digital and analog signals which can be connected freely by means of BICO parameters, are
identified by the prefix BI, BO, CI or CO in their parameter name.
These parameters are identified accordingly in the parameter list or in the function diagrams.
Note
The STARTER commissioning tool is recommended when using BICO technology.
12.4.1

Binectors, connectors

Binectors, BI: Binector Input, BO: Binector Output
A binector is a digital (binary) signal without a unit which can assume the value 0 or 1.
Binectors are subdivided into binector inputs (signal sink) and binector outputs (signal
source).
Table 12- 3
Abbreviation
BI
BO
850
Binectors
Symbol Name
Binector input
(signal sink)
Binector output
(signal source)
Description
Can be interconnected to a binector output as
source.
The number of the binector output must be
entered as a parameter value.
Can be used as a source for a binector input.
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
Drive functions