Siemens SINAMICS G115D Operating Instructions Manual page 70

Wiring
4.9 Connecting the line supply
QUICKON/MQ15 connector (daisy-chain connections not supported)
X1 - line supply (IN), 4-pin, male
Glanded variant
X1/X3 - line supply terminals (screw-type)
Motor-mounted converter
Screw tightening torque:
1.75 Nm/15.5 lbf.in
For wall-mounted converter, you must remove the local/remote control (LRC) panel or the
blanking cover to get access to the line supply terminals.
Further information
68
Cables and connectors (Page 62)
Glanded installation kit (Page 32)
Wall-mounted converter
Screw tightening torque:
1.7 Nm/15.0 lbf.in
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
Signal Description
L1 Line phase L1
L2 Line phase L2
L3 Line phase L3
Protective earth
Signal Description
L1 Line phase L1
L2 Line phase L2
L3 Line phase L3
PE Protective earth
Cable gland size: M25 * 1.5
SINAMICS G115D distributed drive