Siemens SINAMICS G115D Operating Instructions Manual page 46

Mounting
3.3 Mounting the optional components
3. Choose one of the following three methods according to the applicable converter mounting
position to
– Method 1 (applicable to all permissible mounting positions)
– Method 2 (applicable only to the mounting position with the heatsink facing upwards)
– Method 3
Further information
For more information about the SINAMICS G120 Smart Access and the SAM interface kit, see
SINAMICS G120 Smart Access Operating Instructions.
44
connect the G120 Smart Access fitted with the SAM interface kit to the converter:
Attach the G120 Smart Access to a metallic plate via one magnetic side of the SAM interface kit
and then connect the SAM interface kit cable to the USB interface on the converter.
Snap the rubber support of the SAM interface kit onto the converter heatsink and then
connect the SAM interface kit cable to the USB interface on the converter.
(applicable only to the mounting position with the cable outlets facing downwards)
Snap the rubber support of the SAM interface kit onto the PROFINET cable or the I/O
cable connected to the converter and then connect the SAM interface kit cable to the
USB interface on the converter.
Overview of the manuals (Page 542)
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
SINAMICS G115D distributed drive