Conveyor, Two Directions And Two Speeds (P3393 = 4) - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor technology control

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Advanced commissioning

6.9 Conveyor technology control functions (for G115D PROFINET and AS-i variants only)

Conveyor, two directions and two speeds (p3393 = 4)

With p3393 (conveyor technology application) set to 4, the converter enables the load on a

conveyor belt to move in either positive or negative direction with variable speeds. Four

sensors are required to signal the limit positions for the motor to stop or decelerate.

Precondition

You interconnect the signals of the sensors with the digital inputs of your choice.

Conveyor technology control parameters (Page 206)

Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002

SINAMICS G115D distributed drive