CHAPTER 13 REMOTE-CONTROL TRANSMISSION FREQUENCY GENERATOR
Figure 13.5-2 illustrates operation of the remote-control transmission frequency generator.
Figure 13.5-2 Operation of Remote-control Transmission Frequency Generator
Cycle set value
(RCR2: SCL0 to SCL5)
"H" width set value
(RCR1: HSC0 to HSC5)
RCO output waveform
*1: In case of selecting 0.5 tinst(internal count clock)
Cycle = 0.5 tinst × (value compared for cycle +1)
In case of selecting 1/8/32 tinst(internal count clock)
Cycle = count clock cycle × value compared for cycle
*2: In case of selecting 0.5 tinst(internal count clock)
Cycle = 0.5 tinst × (value compared for "H" width +1)
In case of selecting 1/8/32 tinst(internal count clock)
Cycle = count clock cycle × value compared for "H" width
290
Counter value
00
H
Cycle*
1
"H" width*
2