Wiper Arm Serration
Wiper Pivot Serration
Wire Brush
Cowl top ventilator louver
17.5 – 32.5 mm
(0.69 – 1.28 in.)
AVENSIS REPAIR MANUAL (RM1018E)
WIPER & WASHER
–
WINDSHIELD WIPER MOTOR ASSY
8.
INSTALL WINDSHIELD WIPER MOTOR & LINK ASSY
(a)
Install the meshing of the rubber pin.
(b)
Install the windshield wiper motor & link assy with the 2
bolts.
Torque: 5.5 N m (56 kgf cm, 49 in. lbf)
(c)
Connect the connector.
9.
INSTALL FR WIPER ARM LH
(a)
Operate the wiper, and stop the windshield wiper motor
assy to the automatic stop position.
I35259
(b)
Scrape off the serration part of the wiper arm with a round
file or equivalent.
(c)
Clean the wiper pivot serration with a wire brush.
E58837
(d)
Install the front wiper arm LH with the nut to the position
shown in the illustration.
Torque: 21 N m (210 kgf cm, 15 ft lbf)
HINT:
Hold down the arm hinge by hand to fasten the nut.
I34455
http://vnx.su
66–15